Skip to content

New Trade Petitions Target Certain Plastic Balloons from China, Alleging Dumping Margins of Up to 276%

November 19, 2026

New Antidumping and Countervailing Duty Petitions

On November 18, 2026, U.S. producers filed antidumping (AD) and countervailing duty (CVD) petitions on certain plastic balloons (“plastic balloons”) from China with the Department of Commerce (“Commerce”) and the U.S. International Trade Commission (“ITC”). The petitions allege dumping margins ranging from 50% to 276% and subsidies above the de minimis level. These figures are allegations; Commerce has not calculated any duty or cash deposit rates. If the investigations proceed and Commerce issues an affirmative preliminary determination, U.S. importers could face cash deposit requirements on covered entries as early as February 2027 for CVD and April 2027 for AD. These dates are preliminary and may change.

The subject merchandise—plastic balloons—are constructed of two or more pieces of plastic film that have been extruded, laminated, and/or coated, that are adhered at the edges except for where they are inflated. Plastic balloons come in many sizes, may have surface finishes, may be plain, colored, or have prints. The size limitation on plastic balloons differentiates them from smaller balloons made of plastic which are used in medical applications and larger balloons made of plastic that are used in weather or scientific applications. Plastic balloons are typically used as decorations for celebrations or other functions, corporate events, or party decor.

Importers, retailers, distributors, and their Chinese suppliers should promptly compare their merchandise and supply chains now with the proposed scope. An affirmative preliminary finding could change landed costs and cash flow while orders and shipments are still in the pipeline. The agencies have not yet determined whether the domestic industry is injured or whether the alleged dumping and subsidies exist.

Proposed Product Scope

The petitions propose the following scope language. Commerce may revise the scope during the investigations:

The merchandise subject to this investigation is certain plastic balloons manufactured in the People’s Republic of China with a maximum single body dimension not exceeding twenty (20) feet in uninflated size, made in whole or in part of any type of non-textile plastic film or sheet. Subject plastic balloons include, but are not limited to, plastic balloons constructed of flexible, single, or multi-layer non-textile plastic film. The non-textile plastic film is typically composed of a nylon or polyester substrate to which a polyethylene film has been laminated or coated but may be made in whole or in part of any type of plastic, including, without limitation, plastic derived from petroleum products and plastic derived from cellulose products. The plastic film can also include non-plastic layers or elements, such as a metallic layer made of aluminum or another metal. Subject plastic balloons may also be made of plastic material consisting of only one plastic polymer such as polyurethane. Subject plastic balloons are typically, but not exclusively, constructed of two or more pieces of film that are adhered at the edges except where they are inflated.

Subject plastic balloons can be of any shape and can have any surface finish, including, but not limited to, printed, metallized, non-metallized, holographic, glitter, clear, and matte. Subject plastic balloons that are metallized are commonly referred to as “metallic” or “foil” balloons or inflatables. Non-metallized and/or clear subject plastic balloons are commonly referred to as “non-foil balloons,” “non-foil foil balloons,” “stretch-film balloons,” and “bubble-style balloons.”

Subject plastic balloons can be transparent, opaque, or of any color or combination of colors, and/or unprinted or printed or with images of any type.

Subject plastic balloons include plastic balloons with the foregoing physical characteristics without regard to any accessories (such as weights, ribbons, or sticks) introduced in the manufacturing process or added to the packaging. Subject plastic balloons may or may not have an integrated valve used to inflate the balloon.

Subject plastic balloons remain covered by the scope of this investigation whether imported alone or in combination with non-subject merchandise. When subject plastic balloons are imported in combination with non-subject merchandise, including balloons not meeting the physical characteristics of subject merchandise, only the plastic balloons covered by this investigation will be considered subject merchandise.

Plastic balloons continue to be covered by the scope of this investigation when finished or further processed in a third country by performing finishing or processing that would not otherwise remove the merchandise from the scope of this investigation if performed in the country of manufacture of the plastic balloons. Examples of third-country finishing or further processing that would not remove the merchandise from the scope of the investigation include, but are not limited to, printing, application of other surface treatments such as coatings of paint or plastic, packaging, repackaging, and application of surface decals or stickers or accessories.

Excluded from the scope of this investigation are plastic balloons whose body is rectangular or oblong in shape when uninflated and that measure less than one inch (1.0”) at their narrowest body dimension, such as, for example, balloons used for medical purposes.

Excluded from the scope of this investigation are inflatable products made from sheet or film in which polyvinyl chloride (commonly known as “PVC”) is the predominant polymer and that is five (5) mils (0.005 inches or 127 microns) or more in thickness, such as, for example, inflatable articles for use in a swimming pool. Also excluded from the scope are balloons constructed exclusively of natural or synthetic latex or rubber.

Also excluded are inflatable articles that require a continuous air supply to remain inflated, such as fabric holiday yard inflatables and advertising inflatables.

Subject plastic balloons are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 9503.00.0090 and 9505.90.6000. Subject plastic balloons also enter under HTSUS subheadings 9503.00.0071 or 9503.00.0073. While the HTSUS subclassification is provided for convenience and customs purposes, the written description of the scope remains dispositive.

Alleged Margins and Potentially Affected Companies

The petitions identify certain Chinese producers and exporters and U.S. importers. Being named does not establish that a company’s products are covered; being absent from the lists does not establish that they are excluded. Companies should review their merchandise and supplier relationships against the proposed scope. Clark Hill can provide the lists identified in the petitions.

The petitioners allege the following margins. Commerce will calculate any applicable deposit rates during its investigations:

  • China: alleged AD margins of 50% to 276%; alleged CVD subsidies above de minimis, without a proposed numerical CVD rate.

How the Investigations Proceed

The ITC will first decide whether there is a reasonable indication of material injury or threat of material injury to the U.S. industry. A negative preliminary injury determination would terminate the investigations. If the ITC’s findings are affirmative, Commerce will investigate dumping and subsidization and calculate any AD and CVD rates. Final duties require affirmative final determinations from both agencies.

If the investigations continue, Commerce’s preliminary CVD and AD determinations are estimated for February 11, 2027, and April 27, 2027, respectively. Following an affirmative preliminary determination, cash deposits generally begin on covered entries as of publication of that determination in the Federal Register. If critical circumstances are found, suspension of liquidation and cash deposit requirements may apply retroactively to entries made up to 90 days before that publication. The dates are estimates and may be extended; the petitioners’ alleged margins are not the deposit rates.

What Importers and Chinese Suppliers Should Do Now

U.S. importers should compare specifications, materials, dimensions, and processing history for each product with the proposed scope; identify the manufacturer and exporter; and map open orders and expected entry dates. Review landed cost and cash flow scenarios using possible AD and CVD deposits, without treating the petitioners’ estimates as the eventual rates.

Chinese producers and exporters should preserve product, sales, production, and subsidy records, identify related companies, and prepare for possible Commerce questionnaires. In an AD investigation for China, timely separate rate applications may be important for exporters seeking a rate distinct from the China-wide rate. The agency’s initiation notice and subsequent questionnaires will set actual filing deadlines.

Both sides should review pricing and duty allocation terms in supply contracts and decide promptly whether to present product scope or injury arguments. The indicative schedule below is subject to agency notices and extensions.

Contact Clark Hill

For help assessing product coverage, response obligations, or import planning, contact Clark Hill’s International Trade team:

Subscribe here to receive future International Trade alerts directly to your inbox.

This publication is intended for general informational purposes only and does not constitute legal advice or a solicitation to provide legal services. The information in this publication is not intended to create, and receipt of it does not constitute, a lawyer-client relationship. Readers should not act upon this information without seeking professional legal counsel. The views and opinions expressed herein represent those of the individual author only and are not necessarily the views of Clark Hill PLC. Although we attempt to ensure that postings on our website are complete, accurate, and up to date, we assume no responsibility for their completeness, accuracy, or timeliness.

Subscribe for the latest

Subscribe